SERVICES
REQUEST A QUOTE
ODME (Oil Discharge Monitoring Eguipment)
The ODME principle is based on a measurement of oil content in the ballast water, which is held up against the regulations and requirements.
- ODME obligatory installation MARPOL 73/78 Annex 1, regulation 15
- By January 1st 2016, ODME must be certified for Bio fuels in order for vessel to carry them Resolution MEPC.240(65)
This service is required when the existing ODME needs to be renewed or replaced. We are providing reputable and reliable ODME makers to ensure satisfactory operation and ma intenance of your systems.
ANNUAL INSPECTION & CALIBRATION
Annual inspection is required to avoid unnecessary failures (Alarms). During our Annual inspection the ODME System is fully checked and calibrated and tested adjusting, if necessary, according to maker's instructions. After each inspection the crew is instructed on how to maintain a good working ODME System.
RETROFIT
This service is required when the existing ODME needs to be renewed or replaced. We are providing reputable and reliable ODME makers to ensure satisfactory operation and ma intenance of your systems.
Annual inspection is required to avoid unnecessary failures (Aiarms). During our Annual nspection the ODME System is fully checked and calibrated and tested adjusting, if necessary, according to maker's instructions. After each inspection the crew is instructed on how to maintain a good working ODME System.
15 ppm Bilge Alarm
Bilge Alarms for the marine market, are designed to measure the oil content in contaminated bilge water, in accordance with the MARPOL regulations.
The 15 ppm Bilge Alarm type BilgMon 488TM, is designed to meet and is certified in accordance with the new IMO resolution MEPC.107(49)
- ODME obligatory installation MARPOL 73/78 Annex 1, regulation 15
- By January 1st 2016, ODME must be certified for Bio fuels in order for vessel to carry them Resolution MEPC.240(65)
This service is required when the existing ODME needs to be renewed or replaced. We are providing reputable and reliable ODME makers to ensure satisfactory operation and ma intenance of your systems.
ANNUAL INSPECTION & CALIBRATION
Annual inspection is required to avoid unnecessary failures (Alarms). During our Annual inspection the ODME System is fully checked and calibrated and tested adjusting, if necessary, according to maker's instructions. After each inspection the crew is instructed on how to maintain a good working ODME System.
RETROFIT
This service is required when the existing ODME needs to be renewed or replaced. We are providing reputable and reliable ODME makers to ensure satisfactory operation and ma intenance of your systems.
Annual inspection is required to avoid unnecessary failures (Aiarms). During our Annual nspection the ODME System is fully checked and calibrated and tested adjusting, if necessary, according to maker's instructions. After each inspection the crew is instructed on how to maintain a good working ODME System.
15 ppm Bilge Alarm
Bilge Alarms for the marine market, are designed to measure the oil content in contaminated bilge water, in accordance with the MARPOL regulations.
The 15 ppm Bilge Alarm type BilgMon 488TM, is designed to meet and is certified in accordance with the new IMO resolution MEPC.107(49)
-00095G.jpg "ODME (Oil Discharge Monitoring Eguipment) 00009")
-00096G.jpg "ODME (Oil Discharge Monitoring Eguipment) 00096")
-00097G.jpg "ODME (Oil Discharge Monitoring Eguipment) 00097")
-00098G.jpg "ODME (Oil Discharge Monitoring Eguipment) 00098")