Promotions
Certifications
Phone
+ 1 713 923 6200
+ 1 504 466 1662
Shadow
Welcome to Extinval USA
Your Marine Safety Service Provider
Shadow

ODME (Oil Discharge Monitoring Eguipment)



The ODME principle is based on a measurement of oil content in the ballast water, which is held up against the regulations and requirements.

  - ODME obligatory installation MARPOL 73/78 Annex 1, regulation 15
  - By January 1st 2016, ODME must be certified for Bio fuels in order  for vessel to carry them  Resolution MEPC.240(65)

This service  is required when the existing ODME needs to be renewed  or replaced.  We are providing reputable and reliable ODME makers  to ensure satisfactory operation and ma intenance  of your systems.

ANNUAL  INSPECTION & CALIBRATION
 
Annual inspection is required to avoid unnecessary failures (Alarms). During our Annual inspection the ODME System is fully  checked and calibrated and tested  adjusting, if necessary, according to maker's instructions. After  each inspection the crew is instructed on how to maintain a good working ODME System.


RETROFIT
 
This service  is required when the existing ODME needs to be renewed  or replaced.  We are providing reputable and reliable ODME makers  to ensure satisfactory operation and ma intenance  of your systems.

Annual inspection is required to avoid unnecessary failures (Aiarms). During our Annual nspection the ODME System is fully  checked and calibrated and tested  adjusting, if necessary, according to maker's instructions. After  each inspection the crew is instructed on how to maintain a good working ODME System.

15 ppm Bilge Alarm

Bilge Alarms for the marine  market, are designed to measure the oil content in contaminated bilge water, in accordance  with  the MARPOL regulations.
 
The 15 ppm Bilge Alarm type BilgMon  488TM, is designed to meet and is certified in accordance  with  the new IMO resolution MEPC.107(49)
Image 00009 Shadow
  • Image 00095
  • Image 00096
  • Image 00097
  • Image 00098